Wireless G and N router configuration

Wireless routers are small devices plugged into a modem to create a personal password protected wireless network for a home or office computer network. This allows access to the internet from anywhere in a home or office without connecting the modem to the computer directly. A setup disc can be used to configure the router or it can also be configured using any web browser by filtering the correct default IP address.

Steps on how to configure a wireless router using a setup disc(Cisco Router as a Case Study)

Step 1: Plug one end of the internet cable into the yellow internet port on the Cisco router. Plug the other end into the modem

Step 2: Plug the power adapter into the Cisco router. Plug the other end into a nearby electrical outlet. The router lights up.

Step 3: Turn the computer on

Step 4: Insert the setup disc in the computer's Dvd ROM drive. A license agreement window for the router opens. Click "NEXT" and setup wizard will begin to run.

Step 5: Enter the username and password of a DSL network into the appropriate boxes in the setup wizard if prompted. Click "NEXT". The setup wizard completes the process of setting up the router's software and generates a wireless network name and password.

Step 6: Click ok on the congratulations window. Click "CLOSE" to exit the setup wizard and eject the disc.

 

It gladdens my heart when ever am permitted to share the surface, faint and minute knowledge that have about ICT with the rest of the world. Please endeavor to leave a comment below after reading this post. Also, subscribe to our mailing list so that you will be the first to know what is new on this blog. Scroll down to the bottom of this blog to view our subscriber's form.